Our Products
ecoLine-a
Above Ground Oil Water Separator according to EN858 und DIN1999 to separate free, non-emulsified oil from water.
The ecoLine-a oil/water separator is designed to seperate free non-water-soluble light liquids (as defined in the German Standard DIN 1999 and the European Standard prEN 858-1) with a maximum specific gravity of 0.959 from water (petroleum by products such as gasoline, diesel and other mineral oils).
ecoLine-a offers a full range of above ground oil water separators from 25gpm (1,5l/s) to 636gpm (40l/s).
Available nominal sizes:
NS1.5, NS03, NS06, NS09, NS12, NS20, NS40
Removal efficiency:
Oil concentration < 5ppm
ecoTop
Above ground Oil Water Separator according to EN858 and DIN1999 for the separation of free non-emulsified oil from water.
The ecoTop oil/water separator is designed to separate free non-water-soluble light liquids (as defined in the German Standard DIN1999 and the European Standard prEN 858-1) with a maximum specific gravity of 0.950 from water (petroleum byproducts such as gasoline, diesel and other mineral oils).
The sediment and solids pre-treated runoff is gravity fed or pumped (typically with a positive displacement
or diaphragm type pump) to the gravity separator through a submerged inlet pipe. The separation process relies on the fact, that light fluids have a lower specific gravity than water and thus float on the water surface.
The ecoTop is made of stainless steel 1.4301, pickled and anodized after welding.
Available nominal sizes:
NS03, NS10
Removal efficiency:
Free oil concentration < 5ppm
ecoLine-b
Below Ground Oil Water Separator according to EN858 und DIN1999 to separate free, non-emulsified oil from water.
The ecoLine-b oil/water separator is designed to separate non-emulsified light liquids or low-water-soluble fluids with a specific gravity below 0.95 (gasoline, diesel, heating oils and other mineral oils) from effluent discharge. A two-step separation process, gravity separation and removal of small oil particles by coalescing media elements, produces high removal efficiencies.
The ecoLine-b models are made of Stainless Steel Grade 304 and high grade polyethylene and offer a full range of below ground oil water separators from 50gpm (3l/s) to 1100gpm (70l/s).
Available nominal sizes:
NS01, NS03, NS06, NS10, NS15, NS20, NS40, NS50, NS70, NS100
Removal efficiency:
Oil concentration < 5ppm
ecoSep
Below Ground Oil Water Separator according to EN858 and DIN1999 for the separation of free non-emulsified oil from water.
The ecoSep oil water separator is designed to separate free non-water-soluble light with a maximum specific gravity of 0.95 from water (petroleum byproducts such as gasoline, diesel and other mineral oils).
The automatic shut-off valve stops the flow from the grit chamber either when the maximum oil storage capacity is reached or when a certain liquid level in the separation chamber is exceeded. In its closed position, the valve is tight up to 50kPa (5m total head) pressure.
With ecoSep you receive a high-grade quality product, that (by proper use) exceeds all guidelines of European, Australian and North American Standards for oil/water separation.
Available nominal sizes:
NG03, NS10, NS20
Removal efficiency:
Free oil concentration < 5ppm
ecoSep XL
Below Ground Oil Water Separator according to EN858 and DIN1999 for the separation of free non-emulsified oil from water.
The ecoSep XL NG40 is designed to separate non-emulsified light liquids or low-water-soluble fluids with a specific gravity below 0.95 (gasoline, diesel, heating oils and other mineral oils) from effluent discharge. Removal of small oil particles by coalescing media elements, produces high removal efficiencies.
The grit chamber removes solids from the influent, thus ensuring unimpeded functioning of the oil separator itself. The grit trap can be the first concrete tank of a standard two-tank design, or part of a combined single tank solution (grit chamber and separation chamber).
Available nominal size:
NS40 for one unit. Higher flow rates possible (parallel arangement).
Removal efficiency:
Free oil concentration < 5ppm
ecoGrease-a
Designed to exceed removal efficiencies <25ppm!
The ecoGrease system separates liquid, coagulating animal and vegetable fat and grease from water prior to discharge into septic or municipally owned sewers.
For the first time, a grease separation technology will allow the consultant, plumber or end user to not only size the system strictly by flow-rate, but also achieve specific effluent removal efficiencies for these pollutants!
The integrated sight glass enables accurate monitoring of accumulated grease levels which determines appropriate disposal intervals.
Fields of application:
Kitchens
Restaurants, hotels
Institutional and processing facilities, …
Available nominal sizes:
NS04, NS07, NS10
Removal efficiency:
Free oil concentration < 5ppm
ecoStop® Spill Control
Readily prepared for the installation in a circular precast concrete structure.
The automatic shut-off valve stops the flow from an above-grade area either when the maximum oil storage capacity is reached or when a certain liquid level in the separation chamber is exceeded. In its closed position, the valve is tight up to 0.5 bar.
Components list:
- Spill Control Valve
- Float for Spill Control Valve
- PVC Pipe
- NBR Gasket for PVC Pipe
- Mounting Material
Available nominal sizes:
DN100, DN150, DN200
ecoWarn
Specially designed warning device for oil water separators
100-240 VAC, 50/60 Hz
Set consists of:
- Control unit
- Sensor for detecting high liquid level, 5m cable length
- Sensor for detecting oil, 5m cable length
- Cable connector for two sensors
- Mounting material
→ other warning devices on request
Automatic Oil Draw-off Device DN50
The patented “Automatic Oil Draw off Device” (“ADD”) marks a very important development in oil water separator skimmer technology. The ADD automatically and mechanically extracts the refined oil any ecoTECHNIC or third party separator has separated and drains it to a separate container providing pure separated oil which is 99.7 % free of water.
The need for septic truck service is thereby greatly reduced providing the operator with substantial costs savings and it also provides a valuable commodity for resale - pure recycled separated oil containing only 0.3 % water.
Suitable for our ecoLine-a, ecoLine-b and ecoSep-XL as well as for expanding all oil water separator units.
Automatic Oil Draw-off Device for ecoTop
The patented “Automatic Oil Draw off Device” (“ADD”) marks a very important development in oil water separator skimmer technology. The ADD automatically and mechanically extracts the refined oil any ecoTECHNIC or third party separator has separated and drains it to a separate container providing pure separated oil which is 99.7 % free of water.
The need for septic truck service is thereby greatly reduced providing the operator with substantial costs savings and it also provides a valuable commodity for resale - pure recycled separated oil containing only 0.3 % water.
Suitable for ecoTop.